DISPLAY FOR REFERENCE FORCE TRANSDUCERS

INDI 00




CHECK FOR LAST UPDATE
on our new website www.sensy.com
 

The INDI-00 is a high  accuracy   portable  indicator  designed  to  be used  in combination with standard reference  force  transducers with accuracy  class 0.5  and  00 following  the norm ISO376.
Display :

  • Display                                           :  6 digits (red leds of 15 mm)

  • Units                                              :  Newton, kilo Newton or mV/V

Input signal :

  • Input                                               :  Wheatstone bridge (6 wires – 50 ohms min.)

  • Maximum                                        :  4 mV/V

  • Transducer supply                            :  5 Volt (inverted polarity – 29 Hz)

Accuracy :

  • Accuracy class                                :  0.01 %

  • Non-linearity                                    :  £ 0.002 % of full scale

  • Input resolution                                :  0.1 mV/V per digit

  • Internal resolution                             :  550.000 divisions

  • Conversion speed                             :  17 / s

  • Thermal stability of zero                    :  £  2 ppm/°C

  • Thermal stability of span                   :  £  2 ppm/°C

  • Long term stability                            :  £  0.005 % of full scale per year

Outputs :

  • Digital outputs                                  :  RS-232C or RS-485

  • Analog output (option)                       :  0..10 Volt or 4..20 mA (16 bits)

  • 2 independant set points (option)        :  24 VDC – 100 mA (transistor output)

Environnement :

  • Power supply                                    :  220 VAC (option:internal rechargeable battery)

  • Operating temperature                       :  from -10 to +40°C

  • Storage temperature                          :  from -10 to +70°C

  • Humidity                                           :  £  90 % RH

  • Protection                                         :  IP 54

Other specifications :

  • Internal calibration resistor activated by push button on the front plate

  • Weight                                             :  6.7 kg

Complementary products :

  • Acquisition and management software (see specific documentation)

  • Transportation case

FULL DATA SHEET

SENSY s.a.
SENSORS and SYNERGY
 Allée Centrale
B-6040 JUMET
Tel.  : +32 71 25 82 00
Fax : +32 71 37 09 11
To contact us...